Effects of vacuuming process parameters on the thermal performance of composite heat pipes


Yong Lia,b, Shengle Chena, Bolin Hea, Yuying Yanb, Bo Lib

*a School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou 510640, China

*b Fluids & Thermal Engineering Research Group, Faculty of Engineering, University of Nottingham, UK


Cylindrical heat pipes with sintered-grooved composite wicks are manufactured by more than 20 processes. Essential to their thermal performances are the working fluid filling and vacuuming processes. In this work, the effects of various process parameters on the thermal performance of a composite heat pipe were examined experimentally by conducting transient and steady-state tests. Under the conditions of the first vacuuming process, the effective working length showed a more remarkable effect on the start-up performance of the heat pipes than the first vacuuming time and filling ratio. The isothermal performance demonstrated sensitivity to the filling ratio. Under the conditions of the second vacuuming process, the second vacuuming temperature showed a remarkable effect on the isothermal performance. The thermal resistances were less than 0.02 K/W at the evaporator and less than 0.09 K/W at the condenser with respect to those less than 0.16 K/W after the first vacuuming process.


Analysis of Collapse in Flattening a Micro-grooved Heat Pipe
作者:Yong Li, Ting He, Zhixin ZengSchool o...
Comparison of radial forging between the two- and three-split dies of a thin-walled copper tube duri
作者:Yong Li, Jinlong Huang, Guangwen Huan...